The structure of the stand construction is roughly divi […]
The structure of the stand construction is roughly divided into: wooden structure, truss structure, square aluminum structure and the recently popular quick-recyclable materials.
Wood structure: It is the main form of booth decoration now. It can be divided into four types: wood structure paint, wood structure fire board, wood structure paint and wood structure sticker.
Baking varnish structure: The base layer board is made of MDF. After repeated grinding and lacquering process, the surface of the finished product is smooth, smooth and textured, with a certain degree of reflection, high cost, and natural seams on the site. Mostly used when large companies have higher budgets.
Fireproof board structure: The baseboard is made of multi-layer board, and the surface layer of the fireproof board is brushed and the surface of the finished product is flat; the surface of the material is limited by the material, and the transportation process is easy to be damaged.
Coating structure: The base board is made of multi-layer board, which is finished by the primer polishing and other processes. The whole construction is completed without splicing, which is more uniform, the cost is not high, the surface roughness is not fine, and the construction on site takes a long time.
Sticker structure: The base board uses the surface of the multi-layer board to polish and affix the Boeing sticker. The surface is flat, the seam is not obvious, the cost is low, the texture is not good, it is easy to bubbling, and it is easy to be damaged during the construction process.
Truss structure: The truss structure is low in cost and easy to install, but it can only be used in booths with simple structure, and the rendering effect is relatively simple.
Square aluminum profile structure: mostly used by foreign customers, it can present more complex effects, but most of them are right-angled and directional structures, which are not very good for too complicated structures. Aluminum profiles can be reused, which can control costs and be environmentally friendly.
After talking about the materials used to build the main structure, let's talk about the materials that may be used in the booth construction. There are many kinds of materials used in the construction of booths, including steel components, artificial panels, metal, glass, organic plastics, textiles, coatings and various veneers. At the same time, with the advancement of science and technology, many new materials have emerged in the exhibition.
(1) Artificial board
The wood of the artificial board is light, strong, and flexible, and is easy to process and paint. In the construction of exhibitions, commonly used wood-based panels include plywood, blockboard (wood core board), wood veneer panels, fiberboard and the like. The artificial panels used in the exhibition are made of paint for waterproofing and coloring.
(2) Metal materials
Metal materials include stainless steel, steel sheets, and aluminum alloys. Metal materials commonly used in exhibitions include steel plates, angle steels, square tubes, round tubes, stainless steel profiles, and aluminum-plastic panels. If the booth design has a two-layer structure, for safety reasons, the angle steel load-bearing, even the wooden structure support, is the inner angle steel.
(3) Artificial imitation stone
Artificial imitation stone has the texture of natural stone, light weight, high strength, corrosion resistance, pollution resistance, convenient construction, and various colors, varieties, shapes, etc., but the color and texture are not as natural and soft as natural stone. Artificial stone is often used in exhibitions. material.
(4) Architectural glass
The glass has the functions of light transmission, see-through, sound insulation, heat insulation, etc., has good chemical stability, and is resistant to acid (except hydrofluoric acid). The disadvantages are that it is brittle, resistant to quenching and heat, and alkali and metal carbonate can dissolve glass. Wait. Glass is used as a partition, floor and decoration in the exhibition. The sandblasted glass, the frosted glass and the sprayed glass have the functions of light transmission and non-perspective, and can be used as a partition wall. Ice glass and engraved glass can be decorated.
(5) Gypsum decorative board
Gypsum has the properties of light weight, heat insulation, sound absorption, non-combustible, nailable and sawable. The texture is fine, the surface is flat, the color is white, and it has the properties of humidity control and sound insulation. The exhibition can be decorated with plasterboard, decorative plasterboard and gypsum floral ornaments.
(6) Plastic materials
The plastic is light and high-strength, has good insulation and insulation, is corrosion-resistant and decorative, and is easy to process. The plastic materials commonly used in exhibitions are PVC, sun panels, light boxes and so on.